Test Pump, Water Pressure Test Pump Manual Powered Hydraulic

Test Pump, Water Pressure Test Pump Manual Powered Hydraulic Pump Pipeline Leakage Tester Hydraulic Testing Hand Tool 40KG 4MPA

Specification:
Item Type: Manual Pressure Test Pump
Pressure: 40kg/cm2
Water Suction Rate Per Stroke: 32ml
Capacity: 18L
Material: Iron
Weight: 3.3kg/7.3lb (approx.)

Instructions:
1. Connect the water hose to the measured water pipeline (Note: sealed connection)
2. Fill the measured pipe with water, make air out and turn off the switch
3. Make the tank filled with water, lift the handle up and down, and then begin to test pressure
4. Stop pressing when the pressure reach the need
5. After stopping pressing, if the pressure indicated on the pressure gauge does not drop, it can prove that the pipeline pressure resistance is good , or the measured pipe is leakage.

Failure Causes & Remedies:
1. When the handle moves up, no water sucked
a. Check whether the suction pipe is clogged
b. Check whether the switch is tightened
2.The movement is weak when the handle moves up and down
a. Check whether the switch is tightened
b. Check whether the piston shaft seal is damaged
c. Check whether the one-way valve  is clogged  
3. The pressure displayed isn’t stable
a. Pipe joints or water leaks, replace the seals
b. Table rod junction leakage, replace seals
c. Gauge damage, repair gauge

Package List:
1 x Pump Cover
1 x Water Tank
1 x Water Pipe
1x Handle
4 x Screw
3 x Washer
1 x Water Suction Nozzle
1 x User Manual

• Long operation handle makes great leverage for saving effort and reducing hand fatigue.
• Pointer type pressure gauge with clear scales for easy reading.
• Widely used in chemical industry, construction, plumbing, oil, coal, metallurgy, shipbuilding and other industries.
• Made of high quality iron material, surface paint spray treatment, rustproof and durable.
• Suitable for pressure testing of a variety of pressure vessels, pipes, valves, rubber fittings.