Intex robot vacuum cleane

Robot vacuum cleaner. It is very simple to start thanks to its Venturi system it connects to the discharge nozzle (diameter 38 mm), the pressure of the water makes it work and change direction every 30 to 50 seconds. The circulation of the water on each side allows it to be ballasted. Mounts partially to the walls.
Note

1. The self cleaner must be connected to a filter pump with a flow rate between 1600 and 3500 gallons/hour (6056 – 13248 liters/hour).
2. The self cleaner must be connected to the outlet of the filter pump.
3. The consumer needs to clean the self cleaner before storage

The

automatic pool cleaner is a hassle-free solution as it effectively and automatically sucks up the entire pool floor. Not suitable for in-ground pools, this pool cleaner was designed for above ground pools Intex with 1-1/2in hose fittings and attaches to the pool inlet connector with a 24ft 7in hose.

-Requires a filter pump with a flow rate between 1,600 and 3,500 gph.

-Not suitable for in-ground pools.

Box Contains

1 x one pool cleaner

• Automatically vacuums the entire pool floor
• Effectively and hassle-free
• Requires a filter pump with a flow rate between 1,500-3,500gph(5,678-13,248L/hr)
• Attaches to the inlet connector in the pool with a 7.5m hose
• For Intex above ground pools with 38mm hose fittings only; Not suitable for in-ground pools