Makita DMP180Z 18V Li-ion LXT Inflator – Batteries
Makita DMP180Z 18V Li-ion LXT Inflator – Batteries and Charger Not Included
From the manufacturer
Makita DMP180Z
The DMP180Z Inflator is powered by 18V Li-ion LXT slide type battery (not included) to discharge up to 12 litres air per minute, suitable for inflating cycle and vehicle tyres, sports balls and inflatable leisure equipment.
The DMP180Z is equipped with digital pressure gauge with backlight for increased visibility in poor light, auto-stop function to stop automatically when the set target pressure is reached, and memory function to remember the last pressure setting before turning the Inflator off.
The thermostat is activated to protect the inflator when the pump temperature increases to protect from over-heating.
The DMP180Z is not compatible with G-Series batteries.
- Digital pressure gauge with backlight
- High stability on the ground
- Auto-stop function
- LED job light
- In built storage for different valve adapters
- Main switch equipped with auto-off function to prevent accidental start-up during transport
- Memory function
- Suitable for inflating cycle and vehicle tyres, sports balls and inflatable leisure equipment
- Maximum air pressure 830 kPa
- Not compatible with G-Series batteries
| SKU: | B085M2C6CP |
| Weight: | 1.4 kg |
| Dimensions: | 1 x 1 x 1 cm; 1.4 Kilograms |
| Brand: | Makita |
| Model: | DMP180Z |
| Batteries Included: | 1 Lithium Ion batteries required. |
| Manufacture: | Makita |
From the manufacturer
Makita DMP180Z
The DMP180Z Inflator is powered by 18V Li-ion LXT slide type battery (not included) to discharge up to 12 litres air per minute, suitable for inflating cycle and vehicle tyres, sports balls and inflatable leisure equipment.
The DMP180Z is equipped with digital pressure gauge with backlight for increased visibility in poor light, auto-stop function to stop automatically when the set target pressure is reached, and memory function to remember the last pressure setting before turning the Inflator off.
The thermostat is activated to protect the inflator when the pump temperature increases to protect from over-heating.
The DMP180Z is not compatible with G-Series batteries.
