Car Wheel Protection Ring, 8 M/Roll Car Rim Protection Strips, Tire Scratch Resistance Anti-Collision Alloy Wheel Rim Protectors Self-Adhesive Protector Tape with Adhesion Promoter (red)

8 m/roll car rim protection strips, rim styling rim protector, rim protection rings, self-adhesive protector tape, rubber decoration strips, rim protection ring suitable for most car rim molding strips, easy to dismantle and change other colors. Does not cause any damage to the surface of the vehicle.

SPECIFICATION:

– Product: Rim protection strips

– Material: rubber

– Length: 8m

– Width: 8.2 mm / 0.32 inch

– Color: yellow/red/pink/white/black/gray/green/orange/purple/blue

THE PACKAGE INCLUDES:

1 x rim protection rings（8m）

5 x Adhesion Promoter

INSTRUCTIONS FOR USE:

1. Clean the wheel hub and after drying, wipe it with alcohol along the edge of the wheel hub to ensure it is dust-free, water-free and oil-free.

2. Apply the adhesion promoter to the wheel hub adhesive strip, let it dry before attaching the adhesive strip (double-sided adhesive tape should be attached to the adhesion promoter).

3. Tear off part of the tape while sticking it, then press firmly. Note: When the temperature is below 20 degrees, you need to heat the double-sided tape.

Note: Do not wet within 3-5 days of application and vehicle speed should be kept below 40 km/h.

SUGGESTIONS:

– Use a lighter or hot hair dryer to slightly heat the tape on the products to increase stickiness. (All adhesive tapes are weather dependent)

If you have any questions about our products, please feel free to contact us. We will solve the problem for you as soon as possible.

• 【High-quality material】The wheel abrasion protection strips are made of high-quality TPE rubber, which is safe and environmentally friendly, soft in texture, wear-resistant and durable, and not easy to bend.
• 【Not easy to fall off】 In addition to this car wheel protection strip, we also provide an additional adhesion promoter. It uses strong double-sided tape and an adhesion promoter to make it more adhesive, so you don’t have to worry about the risk of falling off.
• 【Protective Device】The U-shaped structure of the rim protector is closer to the edge of the rim to avoid mechanical damage to the rim.
• 【Wide range of uses】The rim protection ring is suitable for most car rim molding strips and is easy to remove and replace with other colors. Does not cause any damage to the vehicle surface.
• 【Note】 Double-sided tape should be heated when the temperature is below 20 degrees. Do not touch water for 3-5 days after application and vehicle speed should be kept below 40!