Johnstone's – Quick Dry Gloss Finish – Brilliant White

Johnstone's – Quick Dry Gloss Finish – Brilliant White – Water Based – Interior Wood & Metal – Radiator Paint – Low Odour – Dry in 1-2 Hours – 13m2 Coverage per Litre – 1.25 L
- Johnstone’s Quick Dry Gloss is a high opacity paint for interior and exterior wood and metal surfaces including skirting boards, doors, radiators and staircases
- It provides a contemporary, high sheen finish that is ideal for a quick and efficient paint job. Easy to apply to surfaces and use, dry to the touch in just 1-2 hours.
- It is a water based paint, with at non – yellowing, low odour formulation and is easy to apply for interior use with coverage of 13m2 per tin
- It provides a classic, yet durable finish to interior wood and metal.
- A unique, wide range of colours that have been specially selected from the latest interior design trends to give you a stand out look with real impact
SKU: | B08593BP59 |
Weight: | 1.5 kg |
Size: | 1.25 l (Pack of 1) |
Dimensions: | 11.6 x 11.6 x 15.1 cm; 1.5 kg |
Model: | 423316 |
Part: | 423316 |
Colour: | Brilliant White |
Pack Quantity: | 1 |
Batteries Required: | No |
Batteries Included: | No |
Manufacture: | PPG Architectural Coatings UK & Ireland |
Colour: | Brilliant White |
Quantity: | 1 |
Size: | 1.25 l (Pack of 1) |
From the manufacturer


Product Details
Johnstone’s Quick Dry Gloss is a high opacity gloss paint for interior and exterior wood and metal surfaces, including skirting boards, doors, radiators and staircases. The water based, low odour formulation is non-yellowing, easy to apply and quick drying.
Preparation
All surfaces should be clean, dry and free from grease. Remove any loose or flaking paint. Rub down sound glossy surfaces with fine waterproof abrasive paper and rinse thoroughly to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Prime bare surfaces with an appropriate Johnstone’s primer. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Application
Ensure maximum ventilation during application and drying. Stir well before use and apply by brush or roller. For best results load the brush or roller. Apply liberally and evenly for a smooth finish, avoid overspreading. Under normal conditions the paint is touch dry in 1-2 hours. Allow 3-4 hours before applying a second coat if required. Do not apply when air or surface temperature is below 10ºC or in damp conditions.
Cleaning
Replace lid firmly after use. Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in warm soapy water and rinse thoroughly. To avoid the risk of spillage, always store and transport in a secure upright position. Do not empty waste paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.