9Thirteen, Cooler Fan/Case. Works with GoPro HERO9, HERO10, HERO11, HERO12, HERO13, Reduce Overheating in Static Environments at Sporting Events,Vlogging (Black, PowerMount Plus – Variable Speed Fan)

The CAMCooLER 9Thirteen is designed as an active cooling fan solution. Works with GoPro HERO9 Black, HERO10 Black, HERO11 Black, HERO12 Black, and HERO13 Black camera overheating issues when used in a static environment.
Our newest model in Balck ASA plastic, this cooler incorporates the ability to use the GoPro Contacto Magnetic Door or USB Pass-Through Door and uses traditional GoPro fingers, GoPro Magnetic Latch Mount, or the PGYTECH Caplock action camera quick release set.
Variable Speed Fan with included USB Speed Controller. Or plug the fan in directly for constant speed operation at ≈5000 RPM. Ambient fan noise is approximately 65 dBA at 5000 RPM.
The fan will help keep your action camera from overheating when recording sporting events, vlogging, creating YouTube content, as a dash cam, or in a small airplane! Whether you find yourself in a cozy studio environment or basking under the scorching sun at your next event, this fan has got you covered.
Made with ASA UV filament that has all the properties of ABS and is weather resistant. Our ASA is UV-resistant and resistant to environmental stress cracking. ASA is commonly used for outdoor applications such as RC planes or car accessories. ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional applications such as ABS.
The Cooler is fully compatible with the GoPro Contacto Magnetic Door or USB Pass-Through Door and or numerous aftermarket doors.
We recommend using an external microphone, so the fan noise doesn’t overwhelm the camera’s internal microphone. Please note that due to GoPro limitations, the Pro 3.5mm Mic Adapter is NOT compatible with the Contacto Magnetic Door! If audio is required, use the USB-Pass Through door with the Pro 3.5mm Mic Adapter or a Bluetooth Microphone.
IP65-rated fans are waterproof against jets of water, but they are not rated for direct submersion in water.
Warning: Please be aware that the cooling fan assembly may cause cosmetic marking, marring, and or light scratching to your GoPro case with repeated use. This is cosmetic and doesn’t impact on the function of the camera. However, do not use our product if this concerns you. The cooling fans will suck in dust and coat the camera with a fine layer of dust, especially when players slide into Homeplate. It is highly recommended to have a battery door that has a passthrough for the power cable. This helps prevent dust migration into the GoPro camera. DO NOT stick your fingers or anything else in the fan blades at any time. Install the cooler over your device first and secure it using the method described in the instructions before applying power. Ensure your fingers and electrical cords are clear of the blades before applying power.
Sustaining 5.3K recording for extended periods above 100°F is likely NOT feasible. Conversely, 4K at 105°F or 1080P at 115°F is highly effective. As a general guideline: Lower recording resolutions are advised for higher ambient temperatures!
Utilizing our cooler fan can effectively lower the operating temperatures of your devices, enabling continuous recording or operation in several scenarios. However, it’s important to note that CAMCOOLERLLC offers no guarantee and will not be held liable for any lost recorded video footage or device malfunctions resulting from overheating. User success can vary due to numerous factors such as individual operating environments, ambient temperature, intensity of use, user behaviors, camera settings, camera/battery condition, and other variables. Therefore, while our data may indicate successful recording/operating possibilities, it’s essential to recognize that actual results may differ for each user and there is no guarantee offered.
In summary, it’s essential to monitor operating conditions, adjust recording resolutions and settings based on environmental temperatures accordingly to ensure optimal performance and mitigate potential overheating issues.

• Variable Speed Fan. Compatible with GoPro HERO9 Black, HERO10 Black, HERO11 Black, HERO12 Black, and HERO 13 Black action cameras. Helps reduce camera overheating!
• Compatible with GoPro Contacto Magnetic Door or USB Pass-Through Door.
• Action cameras are prone to overheating within 25 minutes without a cooling fan.
• Record 4k, 60 fps in direct sunlight at 105°F. Also, setting the camera's Bit-Depth to 8-Bit HEVC and Standard Bit Rate may increase run times. (User results may vary)
• Record 1080P, 60 fps in direct sunlight at 115°F. (User results may vary)
• As a general guideline: Lower recording resolutions are advised for higher ambient temperatures! Sustaining 5.3K recording for extended periods above 100°F is likely not feasible. Conversely, 1080P at 115°F is highly effective.
• Manufactured in the USA by a small business utilizing Fused Deposition Modeling (FDM) equipment. Over 4 years of testing and use in Arizona’s scorching hot summers!

• High quality Dual Ball Bearing, IP65-rated fan.
• Variable Speed Fan with included USB Speed Controller. Or plug the fan in directly for constant speed operation at ≈5000 RPM. Ambient fan noise is approximately 65 dBA at 5000 RPM.