Epindon Hall Effect Stick Module with Tactile Buttons for Victrix Pro BFG Wireless Controllers(Both PS5 & Xbox Version,Conductive rubber is NOT required.) – Left Stick(80G) NEW

Product Including:
● Epindon stick module 1Unit (L stick)
● T2.0 screwdriver
●orange component and spring

• Fix Stick Drift & Conductive Rubber issues. The left stick of the Victrix Pro BFG controller can be replaced if drift or conductive rubber failure occurs.No conductive rubber is required – eliminates wear-related issues permanently.
• No Drift Hall Effect Sensor Sticks:Revolutionary electromagnetic stick module solves the drifting problem, and increasing the precision and durability.the tactile action buttons reduces response times, making it an essential feature for professional FPS gamers.
• Improve module issues such as drift by replacing existing module on the Left stick。
• Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon customized hall effect electromagnetic module.【Attention : 】please insert and remove connector pins of left stick module slowly.
• Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.
• 【Note】: 1).Always place the VICTRIX PRO BFG controller on a flat, level surface when performing reset/calibration. Multiple reset attempts may be required. 2). our stick modules is tested and 1 month warranty;If any questions or concerns , Please contact: [email protected].