BT90 PRO 2-360Ah Battery Tester with Cloud Printing, 30-3800 CCA, 6V/12V/24V Digital Analyzer, SOH/SOC/Volt/Res/Cranking&Charging Test, Real‑Time Ambient Temp, AGM/EFB/Gel/Li

Acclope BT90 Pro Advanced Battery Analyzer Cloud Print (2–360Ah 30–3800 CCA)

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

BT90 Pro Advanced Battery Analyzer Cloud Print

Merchant video

• Does BT90 PRO give a CCA number for LiFePO4?

  -For starter‑type LiFePO4 (cranking use), BT90 PRO can estimate cranking performance within supported profiles.

  -For non‑start LiFePO4, BT90 PRO will not present CCA/SOH verdicts to avoid misleading results; use capacity testing and IR trend instead.

• What’s the correct way to assess non‑start LiFePO4 health with BT90 PRO?

  Fully charge, rest 30–60 min, then discharge at typical load (e.g., 0.5–2A) to recommended/BMS cutoff. Compute capacity = current × hours and compare to rated; >20% drop indicates aging. Monitor voltage sag and connector heat to flag high resistance.

• What battery types does BT90 PRO support?

  Supports 12V lead‑acid (Flooded/AGM/GEL), EFB, starter‑type LiFePO4(cranking). Limited: non‑start LiFePO4 (guidance only, no SOH verdict). Not supported: high‑voltage traction packs, >6S LiFePO4 without compliant BMS, or batteries beyond spec limits.

• Why were my LiFePO4 SOH/CCA readings low on other testers?

  Handheld testers use cranking/IR models; non‑start LiFePO4 lacks pulse current, so SOH/CCA reads “low.” BT90 PRO skips cranking‑based SOH for these, guiding capacity testing and IR trend checks for accurate, practical health assessment overall.

• My resting voltage looks normal but runtime is short. Why（LiFePO4）?

  LiFePO4 has a flat voltage plateau. Resting voltage reflects state of charge more than capacity/health. Short runtime indicates capacity fade/imbalance or elevated resistance. Use the capacity‑test workflow to quantify usable Ah/Wh.

Acclope Professional Automotive Tool

Add To Basket Add To Basket Add To Basket Add To Basket Add To Basket Add To Basket

Customer Reviews	4.6 out of 5 stars66	4.5 out of 5 stars69	4.6 out of 5 stars658	4.6 out of 5 stars658	4.8 out of 5 stars148	4.6 out of 5 stars658
Price	£99.00£99.00	£99.00£99.00	£42.49£42.49	£49.99£49.99	£49.99£49.99	£55.39£55.39
Support lithium battery ?	✔	✔	✔	✔	✔	✔
Support truck battery ?	✔	✔	✔	✔	✔	✔
Support charging test ?	✔	✔	✔	✔	✔	✔
Support cranking test ?	✔	✔	✔	✔	✔	✔
Support 6V battery test ?	✔	✔	✔	✔	✔	✔
Support quick analysis ?	✔	✔	✔	✔	✔	✔
Support motorcycle battery ?	✔	✔	✔	✔	✔	✔
Support ambient temperature ?	✔	✔	✘	✘	✘	✘
Support voltage display ?	✔	✔	✔	✔	✔	✔
Support CCA display ?	✔	✔	✔	✔	✔	✔
Support realtime waveform ?	✔	✔	✔	✔	✔	✔
Support Speed&UX ?	✔	✔	✔	✔	✔	✔

• 【Cloud Print reports: 1‑scan, shareable proof】 ·Specs: On‑screen QR → cloud report; includes SOH/SOC/Volt/Res + Cranking/Charging results; note plate/order ID. ·Function: One scan to view/save/print; link persists for traceability. ·Pain solved: No more photoing screens or paper slips; easy to show customers and fleets objective, time‑stamped evidence to approve work.
• 【Ambient temperature fused with algorithms】 ·Specs: Real‑time ambient temp feed displayed and embedded in reports. ·Function: Temperature informs CCA/IR logic to correct cold/hot bias. ·Pain solved: Winter under‑reads and summer over‑reads cause misdiagnosis (“good battery” called “bad”). BT90 PRO normalizes results for truer cold‑start assessments and fewer warranty disputes.
• 【4-metric diagnosis: SOH, SOC, Voltage, Resistance】 ·Specs: SOH for degradation, SOC for charge level, V for terminal status, IR for sulfation/aging trend. ·Function: Cohesive decision—Good/Recharge/Replace with metrics. ·Pain solved: Single‑number testers miss context. This 4‑axis view pinpoints if the fix is charging, load, or replacement—reducing unnecessary swaps and no‑start callbacks.
• 【Start/charge loop test with ripple insight】 ·Specs: Cranking voltage drop capture; alternator output at idle/load; ripple/diode/regulator window. ·Function: One flow, one report for starting and charging systems. ·Pain solved: “Battery fine but keeps dying.” Quickly separate bad alternator/diode/ground from weak battery; cut diagnostic time and parts darts.
• 【Quick Analysis with trend signals】 ·Specs: “Good/Recharge/Replace” in seconds; retains raw values and trends. ·Function: Front‑desk clarity + technician depth in one pass. ·Pain solved: Slow, expert‑only tools bottleneck bays. BT90 PRO speeds triage for service lanes and roadside, while preserving data for expert confirmation—fewer handoffs and re-tests.
• 【Quick Analysis with trend signals】 ·Specs: “Good/Recharge/Replace” in seconds; retains raw values and trends. ·Function: Front‑desk clarity + technician depth in one pass. ·Pain solved: Slow, expert‑only tools bottleneck bays. BT90 PRO speeds triage for service lanes and roadside, while preserving data for expert confirmation—fewer handoffs and re-tests.
• 【Wide electrical range: 6V/12V/24V; 2–360Ah; 30–3800 CCA】 ·Specs: Covers small moto 12V to heavy‑duty 24V dual packs; supports SAE/EN/IEC/CA/MCA standards. ·Function: One device for passenger cars, motorcycles, light/heavy trucks, RVs, marine. ·Pain solved: Multiple testers and training are costly. Standardize workflow and reporting across mixed fleets and regions with a single tool.

• 【Chemistry‑aware engine: Flooded/AGM/EFB/GEL/Lithium】 ·Specs: Algorithms tuned for lead‑acid families and lithium (often LiFePO4). ·Function: Applies chemistry‑specific IR/voltage behavior to decisions. ·Pain solved: Generic testers misread AGM/EFB or lithium, leading to false “bad” calls. BT90 PRO reduces misdiagnosis on start‑stop and retrofit lithium packs—protecting margins and trust.
• 【Data lifecycle: history, notes, side‑by‑side retests】 ·Specs: Time/temperature/ID notes saved per test; shareable links. ·Function: Fast retrieval for seasonal checks and periodic maintenance. ·Pain solved: Paper logs and phone photos don’t compare well. BT90 PRO enables apples‑to‑apples retests, supports fleet PM schedules, and gives transparent records to lower comebacks.
• 【Built for shops: rugged, readable, upgradable】 ·Specs: Rugged housing; daylight‑readable screen; large keys; firmware upgradable. ·Function: Performs in oily bays and outdoor calls; evolves with updates. ·Pain solved: Fragile, dim tools slow teams and date quickly. BT90 PRO endures tough use and keeps algorithms/language packs current—protecting investment and standardizing results over time.

›