Stud Finder Wall Scanner, WOVTE 7 in 1 Electronic Stud
Stud Finder Wall Scanner, WOVTE 7 in 1 Electronic Stud Finder Detector, Audio Alarm and HD LCD Display for Wood, AC Wire, Metal and Screws Studs Detectio
This stud finder is specially designed for you to DIY safely and efficiently, when you’re mounting TV, cabinets, photo frames, garage racks etc. It is vital that you need to understand what is behind the wall.
Equipped with intelligent microprocessor chips, The stud finder can accurately and quickly locate edges and center of metal, studs, joists, pipes, live ac wire behind walls, floors and ceilings with AC Wire Warning.
How to calibrate the stub finder
1.Place the Stud finder in unobstructed air.
2.Press the power button to power on,then press the mode button to switch the desired mode
3.Press the on/off button to switch the desired strength mode(deep, middle or exact) 4.Press the RESET button until you hear the short beep sound.
5.Release the reset button and move the stub finder along the wall slowly.
- 7 in 1 stud finder: The stud scanner features 5 modes: Stud scan 1/2 inch(12 cm), 1 inch (25mm) and 1.5 inches (38 mm); Metal scan2.36in (60 mm) and AC scan 2in (51 mm),plus Nail Detection, Nail Collection Reminder, Bubble Level, and Backlit Display. You can switch to the required mode to help you find the center and edge of the wood, joist, pipes,or beams, live AC wires and deeper metal in the wall accurately.
- LCD display: This stud finder comes with an HD LCD display which is very convenient to help you clear direction and accurate location of targets, audible warnings and noticeable moving direction arrow on the LCD display.The detection strength in real-time with intuitive arrows and percentage indicators on the LCD display alerts you to the strength and direction of the approaching object, and a beep sounds to notice the location.
- One-touch Calibration: One-touch“RESET”button enable quick calibration in seconds, while the lightweight design and ergonomic grip offer comfortable, steady handling with just one hand.
- Automatic shut-off:Our stud finder scan tester has an automatic shutdown function. When you leave it aside for about 120s, the stud finder wall scanner will automatically shut down. This is a very good feature that can save power and protect the machine, making the battery durable.
- Nail finder & scale ruler: This stud finder includes nail finder on the bottom and and a scale ruler which helps prevent errors and saves time, ensuring your projects are done correctly the first time.
- Easy to use: ①.Place the Stud finder in unobstructed air. ②.Press the on/off button to turn on the stud finder. ③.Press “MODE”button to switch to the desired mode. ④Press the on/off button the switch the desired strength mode(deep, middle, exact). ⑤Calibration: Press the RESET button until you hear a short beep sound. ⑤After finishing calibration, please place the device on the scanning surface. Then move the stud finder along the way slowly. ⑥When the object is found, the device will beep continually with mark on the LCD display.
| SKU: | B0FRLZNKMG |
| Dimensions: | 21 x 7 x 3 cm; 200 g |
| Model: | P14AAF8486 |
| Part: | P14AAF8486 |
| Batteries Included: | 1 9V batteries required. (included) |
| Manufacture: | WOVTE |












