LILYGO T3S3 ESP32-S3 LoRa Meshtastic TTGO Development Board
LILYGO T3S3 ESP32-S3 LoRa Meshtastic TTGO Development Board Wireless Module with 0.96 Inch OLED Display (SX1262 868MHz)
Product Presentation
Product Parameters
It is recommended to regulate the output power of the SX1280 chip between 2-5 dBm when the SX1280 PA module is used to ensure that the entire module emits a power of 20 dBm. If the output power of the SX1280 chip is higher than 5 dBm, it exceeds the maximum allowable input power for the FEM chip and causcauscauscauscauscauscausHowever, the output power is less than 2 dBm, the output power of the module is still within 20 dBm. Therefore, the setting of the output power of the SX1280 chip must be carefully controlled and must not exceed 2-5 dBm to avoid damage to the FEM chip. Adjusting the output power to 3 dBm ensures an output power of 20 dBm.
PIN MAP
T3 S3 is a new version of the LoRa series (formerly LoRa32 series) that contains the SX1280 LoRa module. It supports the LoRa 2.4G frequency band, which allows global use, and is also equipped with the ESP32 main control chip that supports TF cards. WIKI: wiki.lilygo.cc/Github: g: g: ithub.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/tree/master/examples/RadioLibExamples/SX1280
Shipping List
1 X T3S31 X JST 1.25mm 2P2 X 2.54mm Male PIN (1*13P)1 X LoRa Antenna
- Wireless protocol: Wi-Fi Bluetooth 5.0
- Built-in functions: reset boot button, support for TF card
- WIKI: wiki.lilygo.cc/
- 【Github】github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/tree/master/examples/RadioLibExamples/SX1280
- Product service: If you have any questions or suggestions about the product, please feel free to contact us. We will answer your question as soon as possible.
| SKU: | B0FQ9WS75X |
| Model: | SX1262 868MHz |
| Manufacture: | LILYGO |
Product Description




Shipping List
1 X T3S31 X JST 1.25mm 2P2 X 2.54mm Male PIN (1*13P)1 X LoRa Antenna












