Compatible with Dacia Bigster 2025-2026 ACE-1 Car Roof Rack Cross Bar Grey Aluminium 2 Bars

ACE-1 Roof Cross Bars Developed with a modern and aesthetic design approach, the ACE-1 Roof Cross Bars are a vehicle-specific roof rack carrying system designed for vehicles with a gap between the roof rails and the vehicle roof (raised rail). It is engineered to provide balanced, strong, and long-lasting load-carrying performance. This product cannot be used on vehicles without roof rails. For vehicles without roof rails, different ACE series cross bar models are available. ACE-1 adapts to the position and angle of the roof rails on the vehicle, helping distribute the load more evenly at the mounting points. This structure supports driving stability and contributes to reducing the effects of road-induced vibrations. The high corrosion-resistant aluminum body and UV-resistant PA6 GF30 connection components are selected to provide reliable and long-term use under various climate conditions. Elastomer seals on the bar surface create an interface between the load and the bar, helping reduce sudden load movements and limiting unwanted noise caused by friction. The aluminum bars feature a channel structure compatible with T-Bolt mounting elements. Maximum compatible T-Bolt dimensions: 20 mm channel width, 4 mm channel height, and M8 bolt. Additionally, aluminum bars with 75 mm width and 22 mm height are compatible with U-Type mounting bolts. If U-Type mounting is used, it is recommended to check that accessories are suitable for these dimensions. The aluminum bars can carry up to 75 kg while the vehicle is in motion. When the vehicle is parked: 150 kg with 2 bars, 225 kg with 3 bars, and 300 kg with 4 bars are recommended as maximum loads. Please make sure that the vehicle make–model–year information stated in the product title and images matches your vehicle exactly before purchasing. Each product is manufactured in specific dimensions according to the vehicle. Compatibility with accessories from different brands or manufacturers may vary; therefore, checking technical measurements is recommended. It is advised to remove roof load carrying systems when the vehicle is not carrying any load, regardless of brand. Continuous installation increases air resistance, which may result in higher fuel consumption and increased wind noise. Some vehicles have roof dimensions that narrow from front to rear. In such cases, the longer bar should be mounted at the front and the shorter bar at the rear. In some vehicles, the front and rear dimensions may be equal. Usage Areas Camping & Outdoor: When parked, provides suitable infrastructure for rooftop tent use up to 150 kg with 2 bars, 225 kg with 3 bars, and 300 kg with 4 bars. Sports & Hobbies: Can be used with many standard accessories such as bicycle carriers, canoe holders, and ski attachments. Family Use: Creates additional luggage space with roof box installation. Package Contents Aluminum bars Installation kit

• ACE-1 Roof Cross Bars are produced in custom dimensions according to vehicle make–model–year for vehicles with a gap between the roof rails and the roof (raised rail). The product title should be considered; it is not universal.
• COMPATIBLE MOUNTING STRUCTURE The mounting structure is designed to adapt to the position and angle of the roof rails. This helps distribute the load evenly at mounting points, supports driving stability, and reduces road-induced vibrations.
• LOAD CAPACITY The aluminum bars can carry up to 75 kg while driving. When parked: 150 kg with 2 bars, 225 kg with 3 bars, and 300 kg with 4 bars provide suitable load support.
• WIDE ACCESSORY COMPATIBILITY Can be used with accessory systems compatible with T-Bolt or U-Type mounting bolts with a minimum width of 75 mm.
• LOCKABLE & EASY INSTALLATION Equipped with a deterrent locking mechanism against unauthorized removal. Installation can be completed within 15–25 minutes without professional assistance using vehicle-specific mounting kits.