RV Wireless Reversing Camera, Hodozzy Backup Camera with 7
RV Wireless Reversing Camera, Hodozzy Backup Camera with 7″ HD Monitor+AHD Camera, Support Up to 4 Cameras DVR Image Flip,Wireless Reverse Camera 12V-36V for Truck/Trailer/RV/Camper/Excavator/Carava
Digital RV Wireless Backup Camera Kit with 7 Inch IPS Monitor & AHD Camera
720P Camera Features:
- Chips components: AHD HM1246
- Effective pixels: 1280X720P, Image resolution: 130 W pixels
- Signal format: PAL/NTSC, Working temperature: -30°C ~ +60 °C
- Video output: AHD Video Signal, Lens: 16MM F1.66 glass Lens
- Night Vision: Starlight Night Vision. The visible distance is greater than 10 meters
7 inch IPS Monitor Features:
- Monitor Video signal: Supports AHD Digital signals
- Screen size: 7 inch HD Full View Digital IPS Screen
- Effective pixels of the screen: 1024*600P
- Languages: English, Spanish, Italian, German, French, Japanese, Russian
- Screen Brightness: 500CD/M2, The Clearest Video Image
- Video Recording: Support Max 128GB SD Card(Not include)
- Image: Up/Down/Left/Right
- Signal format: PAL/NTSC, Power supply voltage: DC12V-36V
Stable Digital Wireless Singal:
- The 7-inch IPS display that comes with this wireless backup camera system provides a stable signal and eliminates any delay in the picture.
- The signal can reach 328ft/100m in open area and working on vehicle range under 132ft/40m.
- Support up to 4 cameras.(package just include one camera)
Wireless Back Up Camera Kit for Trailer/ Pickup/ Bus/ Truck/ Camper/Caravan/ Van/ RVs/ Boat(12V-36V)
- 7" anti-glare monitor with flip-out sunshade gives pickup, RV, box-truck and boat-trailer drivers a crystal-clear rear view day or night;
- 100 % wireless signal snaps in place without drilling dash or snaking cables, so contractors, campers and fleet managers add pro-grade backup safety to any 12-36 V rig in under 15 min.
AHD Camera Features:
- 18 IR Night Vision:RV wireless reverse camera with 18 IR Infrared light, allows you to see your surroundings clearly even at night when there is no light, which greatly improves driving safety.
- Full Glass Camera Lens:Six layers glass lens clearly capture the license plates as well as road signs during the day and night.
- IP68 Waterproof Level:This wireless backup camera adopts the latest all metal cover sealing tech, the waterproof level of camera can reach IP68.
- 150° Wide View Angle:Wireless backup camera with the wide lens which can provide a 150° wide vision for you, avoid blind spot. Make your driving safer and easier.
- Mirror and Flip:By default, the rear view is a mirror image.With the image flip function, the image switches between four modes: up, down, left and right, you can adjust the viewing angle as needed.
- Guide Lines On/Off:Together with the adjustable parking lines fit different heights camera installation place make a trusted parking assistant.
Unique Sunshade Design:
- 7" anti-glare monitor with flip-out sunshade gives pickup, RV, box-truck and boat-trailer drivers a crystal-clear rear view day or night;
360-Degree Rotating Display:
- Lets you tilt or spin the 7" display to any angle, avoiding glare and putting the display exactly where your eyes already are.
Loop Recording:
- Video Recording: Support Max 128GB SD Card (not included)
- Automatically overwrites the oldest videos when memory is full for seamless loop recording and providing evidence when you need.
Without cables between the monitor and the cameras,installation is so easy
Easy to Install:
- Power the monitor via car charger or hardwired.
- Power the cameras via hardwired.
Please Note:
- Before install, please test them with a temporary power supply to make sure they aren't defective and paired.
- Wireless means the signal from the cameras to the monitor is wireless. There are no cables between the cameras and the monitor.But the cameras and the monitor still need wires to get power and work.
- Please set the little antenna up (near the power adapter) to get the best performance when installation.
- 【Perfect for Pickups, Vans & RVs】The 7" anti-glare monitor sits right on your dash, sunshade flipped out, giving pickup, RV, box-truck and boat-trailer drivers a crystal-clear rear view day or night—no windshield clamp needed. The wireless backup camera for RV and wireless backup camera for trucks snaps in 100 % wire-free, so contractors, campers and fleet managers add pro-grade safety to any 12-36 V rig in under 15 min.
- 【Easy to Install】Dash-mounted 7-inch IPS monitor and one AHD camera: 1. Power the monitor via the included lighter lead or fuse box / ignition. 2. Wire the trailer backup camera to constant tail/running light for full-time monitoring, or to the reverse light for backing only. Call it an rv backup camera or rv backup camera wireless kit—either way, install takes minutes, confidence lasts all day.
- 【AHD Image & 18 IR Night Vision & IP68K Waterproof】The wireless backup camera for trucks uses a 6-glass lens for a wider angle; AHD color detail stays sharp even on the 7" dash monitor. Eighteen IR LEDs give a usable picture in total darkness, while IP68K sealing keeps the rv backup camera working through power-wash, slush and dust—safety you can trust on every run.
- 【Upgrade Wireless Back Up Camera Kit】The dash-top monitor’s regular, right-sized buttons make it easy to toggle guide lines, flip the image or switch the rv backup camera between Normal and Mirror. Whether you label it a trailer backup camera or wireless backup camera for RV, quick presses give you the view you want without hunting menus.
- 【DVR Recording & 4 Channel Split Screen】Insert an SD card (not included) and the monitor records everything the wireless backup camera for trucks sees—handy evidence if trouble finds you. The 7" display also supports up to four cameras: run split-screen or full-screen to kill blind spots on every side of the vehicle. (Kit ships with one camera; add three more anytime.)
| SKU: | B0G6YG97TM |
| Dimensions: | 19L x 5W x 18.3H centimetres |
| Brand: | Hodozzy |
| Manufacture: | Hodozzy |
| Origin: | China |
Product Description




Without cables between the monitor and the cameras,installation is so easy
Easy to Install:
- Power the monitor via car charger or hardwired.
- Power the cameras via hardwired.
Please Note:
- Before install, please test them with a temporary power supply to make sure they aren't defective and paired.
- Wireless means the signal from the cameras to the monitor is wireless. There are no cables between the cameras and the monitor.But the cameras and the monitor still need wires to get power and work.
- Please set the little antenna up (near the power adapter) to get the best performance when installation.







