JetKVM IP KVM DC Power Control Extension, Jet KVM Accessory Remote Power On/Off/Reboot via KVM Over IP, 9-20V Max 5A, USB-C Pass-Through Powe

The DC Power Control extension enables power management for connected DC-powered devices, such as mini PCs or NAS units.

Remote Power Control for any DC device

Add remote power cycling to your JetKVM setup. Plug into the RJ-12 port, route your device’s DC power through the module, and control power directly from the browser with the JetKVM.

It supports DC input ranging from 12 to 20 volts, and we’re including adapters to support 5.5×2.1 mm connections as well.

The extension can also power the JetKVM itself through the RJ-12 connection, streamlining setup and reducing the need for additional power sources.

Pass-through Power

The built-in USB-C port provides 5V power directly through the RJ-12 cable, powering your JetKVM without the need for a separate USB connection.

This eliminates the need for constant USB power from the host computer or a USB splitter, simplifying your setup with a single-cable solution for both power and control.

What’s in the Box

• DC Extension
• RJ12 cable
• 1x 5.5/2.5 mm male to 5.5/2.5 mm male cable

• REMOTE DC POWER CYCLING: Control power states (on, off) for mini PCs, NAS, and single-board computers directly from your browser dashboard. Seamlessly manage any DC-powered device via your JetKVM setup without physical intervention.
• BROAD VOLTAGE COMPATIBILITY: Supporting 9-20V DC input with a maximum 5A current and equipped with 5.5×2.5mm adapters compatible with 5.5×2.1mm connectors this Jet KVM accessory works with most standard DC-powered devices for plug-and-play use.
• SINGLE-CABLE MANAGEABILITY: The built-in USB-C port delivers a stable 5V power loop via the Extension connection. Eliminates the need for separate host USB power feeds, messy hardware splitters, or chaotic cable tangles in your jetkvm kvm over ip rack.
• 2-IN-1 PASS-THROUGH POWERING: This smart module doesn't just switch power for your target host; it simultaneously powers the IP KVM device through the same extension connection. Streamlines your setup and cuts down infrastructure clutter.
• WHAT’S IN THE BOX: 1x DC Power Control Extension, 1x Extension cable, 1x 5.5/2.5 mm male to 5.5/2.5 mm male cable. Everything you need for a clean, slot-free installation and reliable remote KVM setup.