DIY Ship Model Making Auxiliary Bracket Construction Support
DIY Ship Model Making Auxiliary Bracket Construction Support Platform Wooden Assembly Stand for Simulation Warship Sailboa
➤Size:
Base size: 385x150mm
Maximum spacing between pillars: 290 mm
Minimum pillar spacing (without turntable): 65 mm
Minimum spacing between pillars (with turntable): 105 mm
Maximum clamping distance of clamping claws: 70mm/114mm/156mm
Minimum clamping distance of clamping claws: 15 mm
➤Note:
The size is manual measurement, there are errors.
The boat model in the picture is not included and is for your reference only.
The bracket must be assembled by yourself. Combined support requires practical skill.
Buyers are advised to understand before purchasing and place orders with caution.
The main component material of this tool is laminated board after laser cutting.
Due to temperature differences in different regions, there may be slight deformations in the structural components of the received products.
However, since the components will correct each other during assembly, it will not affect the effect of the assembly.
- Item name: boat model mounting bracket/fixed platform/bracket
- Material: laminated board
- Used to assemble proportional ship models, to make, paint and display.
| SKU: | B0DNJLFX6Z |
| Part: | JOT-241119-33 |
| Manufacture: | Jieotwice |
| Reference: | JOT-241119-33 |












