K2 DPF Cleaning Kit 500ml Cleaner Spray & 250ml Fuel

K2 DPF Cleaning Kit 500ml Cleaner Spray & 250ml Fuel Additive DPF GO! Additive, Soot Remover, Filter Regenerator, For Diesel Cars, 2-Part Ki

## K2 DPF Cleaning Kit – Complete Two-Step DPF/FAP Maintenance This practical kit combines two complementary K2 products designed to clean and protect diesel particulate filters: * **K2 DPF Cleaner Spray 500ml** – cleans accumulated soot, carbon and ash deposits directly inside the filter. * **K2 DPF GO! Fuel Additive 250ml** – helps prevent future deposits and supports effective filter regeneration during normal driving. ### K2 DPF Cleaner Spray 500ml A professional cleaner for blocked or contaminated **DPF/FAP filters in diesel engines** and **GPF filters in petrol engines**. The powerful formula dissolves and removes accumulated soot, carbon and ash without requiring the filter to be removed from the vehicle. It helps restore correct exhaust gas flow and can reduce problems associated with a contaminated filter, including loss of engine power and increased fuel consumption. After application, the cleaner evaporates completely without leaving residue. ### K2 DPF Cleaner Directions 1. Allow the engine and exhaust system to cool below **50°C**. 2. Remove the DPF pressure or temperature sensor. 3. Shake the aerosol thoroughly and insert the application tube through the sensor opening. 4. Apply the entire 500ml can to one filter. Pause for approximately 5 seconds after every 3–5 sprays to allow the cleaner to penetrate the deposits. 5. Reinstall the sensor. 6. Start the engine and allow it to idle for at least 15 minutes so the liquid can evaporate. 7. Drive the vehicle for approximately 30 minutes, preferably outside urban areas, while maintaining an engine speed of around 2,500–3,000 RPM. Some residual water vapour may temporarily appear from the exhaust during this process. ### K2 DPF GO! Diesel Fuel Additive 250ml K2 DPF GO! is a preventive diesel fuel additive developed to protect **DPF and FAP particulate filters** against excessive soot and carbon accumulation. Regular use helps maintain correct exhaust gas flow, supports the natural regeneration process and reduces the risk of premature filter blockage. It is particularly recommended for vehicles used mainly in towns, where frequent short journeys may prevent the DPF from reaching the temperature required for effective regeneration. The additive also helps keep the fuel and exhaust systems cleaner, supporting reliable engine operation and extending the service life of the particulate filter. ### K2 DPF GO! Directions 1. Use before refuelling. 2. Open the fuel filler cap and remove the safety seal from the product. 3. Attach the supplied pouring funnel. 4. Pour the entire contents directly into the diesel fuel tank. 5. Refill the vehicle with diesel fuel. One **250ml can treats approximately 50–70 litres of diesel fuel**. For preventive maintenance, use every **2,000 km or every 2–3 refuelling cycles**. Suitable for all types of diesel engines equipped with a DPF or FAP filter. ### Kit Includes * 1 × K2 DPF Cleaner Spray – 500ml * 1 × K2 DPF GO! Diesel Fuel Additive – 250ml * Application tube and pouring funnel A complete cleaning and preventive maintenance solution for vehicles experiencing demanding urban driving conditions, frequent short journeys or early symptoms of DPF contamination.

• COMPLETE 2-STEP DPF CLEANING KIT – Includes K2 DPF Cleaner Spray 500ml for direct filter cleaning and K2 DPF GO! 250ml diesel fuel additive for ongoing protection and preventive maintenance.
• REMOVES SOOT, CARBON & ASH DEPOSITS – The professional DPF Cleaner dissolves contamination accumulated inside DPF/FAP diesel filters and GPF petrol filters without removing the filter from the vehicle.
• HELPS RESTORE FILTER PERFORMANCE – Supports correct exhaust gas flow and helps reduce problems associated with a contaminated particulate filter, including loss of power, increased fuel consumption and restricted regeneration.
• PREVENTS PREMATURE DPF BLOCKAGE – K2 DPF GO! helps reduce soot and carbon accumulation, supports natural filter regeneration and is ideal for vehicles used for frequent short journeys or city driving.
• ASY APPLICATION & WIDE COMPATIBILITY – The 500ml spray treats one filter, while the 250ml fuel additive treats approximately 50–70 litres of diesel. Suitable for all diesel engines equipped with DPF/FAP filters; application tube and pouring funnel included.