ESP32-C6-Touch-LCD-1.47 Development Board, 1.47in Touch
ESP32-C6-Touch-LCD-1.47 Development Board, 1.47in Touch Display, Wi-Fi 6 RISC-V Dual Core 160MHz, 8MB Flash, 1.47inch 172×320 IPS Touch, BT5 Mesh, Micro SD, 6-Axis IMU
ESP32-C6 1.47" Capacitive Touch Display Development Board
ESP32-C6-Touch-LCD-1.47: 1.47 inch 172×320 capacitive touch IPS display, ESP32-C6FH8 dual RISC-V up to 160 MHz, Wi-Fi 6 + Bluetooth 5 (LE), 6-axis IMU, Micro SD and 8MB Flash on a Type-C board, suitable for IoT and HMI prototyping.
Key Features of ESP32-C6 Touch LCD Board
Dual RISC-V Cores
The ESP32-C6FH8 pairs a 160MHz core with a 20MHz low-power core, plus 512 KB SRAM and 8 MB Flash.
1.47" Touch IPS Display
The 1.47-inch 172×320 IPS panel shows 262K colours. Capacitive touch uses JD9853 and AXS5106L.
Wi-Fi 6 + BT5 (LE)
2.4 GHz Wi-Fi 6 (802.11ax/b/g/n) and Bluetooth 5 (LE) with Bluetooth Mesh for low-power links.
6-Axis IMU + Micro SD
The QMI8658 6-axis IMU handles motion sensing and the Micro SD slot adds local storage on board.
Board Layout and Dimensions
Onboard Resources
Integrates ESP32-C6FH8, ceramic antenna, ME6217C33M5G LDO, ETA6098, QMI8658 6-axis IMU, Micro SD slot, RESET and BOOT buttons, plus USB Type-C.
Product Dimensions
PCB measures approximately 44.50 x 24.55 mm. Mounting holes and connector positions are shown in mm for case and enclosure design.
Programming Options and Package
Program via ESP-IDF or Arduino IDE over USB Type-C, with 22-pin header, RESET and BOOT buttons. Box contains one board and two unsoldered black pin headers.
Does the ESP32-C6-Touch-LCD-1.47 have Zigbee or Thread?
No. Wireless is Wi-Fi 6 (802.11ax/b/g/n) and Bluetooth 5 (LE) with Mesh only.
What size and type of screen does it have?
A 1.47 inch capacitive touch LCD, 172×320 resolution, IPS panel with 262K colours, driven by the JD9853 (SPI) with an AXS5106L I2C touch controller. No external display is needed.
What development frameworks does it support?
ESP-IDF and the Arduino IDE. You program and power it over the USB-C port.
Are the headers pre-soldered?
No. The board ships with two black straight pin headers that you solder yourself. The -M variant has pre-soldered headers.
How many GPIO and is it Pico compatible?
It uses a 22-pin header interface. The supplier page does not state 40-pin Pico compatibility, so treat it as a standalone 22-pin board, not a Pico drop-in.
What processor and memory does it use?
ESP32-C6FH8: dual RISC-V cores (160MHz high-performance + 20MHz low-power), 512KB HP SRAM and 8MB Flash. No external PSRAM is required for typical UI plus networking.
- INTEGRATED IPS TOUCH DISPLAY: The board features a 1.47-inch capacitive IPS LCD with 172×320 resolution, 262K colours, JD9853 display driver and AXS5106L touch controller, providing an integrated colour interface for embedded applications
- WI-FI 6 AND BLUETOOTH 5 LE CONNECTIVITY: The ESP32-C6FH8 supports 2.4GHz Wi-Fi 6 (802.11ax/b/g/n), Bluetooth 5 LE and Bluetooth Mesh, enabling development of connected devices, wireless sensors and IoT applications
- DUAL RISC-V PROCESSING ARCHITECTURE: Powered by the ESP32-C6FH8 with a 160MHz RISC-V high-performance core and 20MHz low-power core, plus 512KB HP SRAM and 8MB Flash for embedded development projects
- BUILT-IN SENSOR AND STORAGE OPTIONS: Includes a QMI8658 6-axis IMU with accelerometer and gyroscope functions, plus a Micro SD card slot for motion sensing, data logging and embedded storage applications
- USB-C DEVELOPMENT AND EXPANSION: USB Type-C supports power supply and firmware flashing. BOOT and RESET buttons simplify development testing, while the 22-pin header provides access to GPIO interfaces for ESP-IDF and Arduino IDE projects
| SKU: | B0HC6JLQYX |
| Weight: | 20.4 Grams |
| Brand: | wottzentic |
| Manufacture: | Wott |
Product Description
ESP32-C6 1.47″ Capacitive Touch Display Development Board





Program via ESP-IDF or Arduino IDE over USB Type-C, with 22-pin header, RESET and BOOT buttons. Box contains one board and two unsoldered black pin headers.
Does the ESP32-C6-Touch-LCD-1.47 have Zigbee or Thread?
No. Wireless is Wi-Fi 6 (802.11ax/b/g/n) and Bluetooth 5 (LE) with Mesh only.
What size and type of screen does it have?
A 1.47 inch capacitive touch LCD, 172×320 resolution, IPS panel with 262K colours, driven by the JD9853 (SPI) with an AXS5106L I2C touch controller. No external display is needed.
What development frameworks does it support?
ESP-IDF and the Arduino IDE. You program and power it over the USB-C port.
Are the headers pre-soldered?
No. The board ships with two black straight pin headers that you solder yourself. The -M variant has pre-soldered headers.
How many GPIO and is it Pico compatible?
It uses a 22-pin header interface. The supplier page does not state 40-pin Pico compatibility, so treat it as a standalone 22-pin board, not a Pico drop-in.
What processor and memory does it use?
ESP32-C6FH8: dual RISC-V cores (160MHz high-performance + 20MHz low-power), 512KB HP SRAM and 8MB Flash. No external PSRAM is required for typical UI plus networking.












